Prisma iPM a tested switchboards

A switchboard must comply with the requirements in standard IEC 61439-1 to guarantee the safety and reliability of the installation.

Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation. What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

The Schneider Electric solution

 - Specify switchboards that comply with standard IEC 61439-1.

     - Guarantee a level of safety that has been 100% tested, from the day the switchboard is installed and throughout its service life.

     - Ensure the return on investment through easy upgrading of the installation in compliance with the standard.

     - Guarantee that the switchboard complies with the technical specifications.

Prisma iPM tested switchboards

The conformity of the switchboard has been tested and proven.

A Prisma iPM switchboard is:

     - made up of Schneider Electric low-voltage devices and components that all comply with the applicable standards,

     - based on configurations in the Schneider Electric catalogue,

     - made up of Prisma iPM mechanical and electrical components that have been subjected to the twelve tests required by the standard,

     - mounted and wired by a panel builder in compliance with professional standards,

     - subjected to the nine routine verifications required by the standard.
 

Schneider Electric makes available to the panel builder everything required to create tested Prisma iPM switchboards, including the basic configurations in the low-voltage distribution catalogue, all the documentation for switchboard design and mounting, calculation and design software, etc.

 

The panel builder can easily demonstrate conformity with standard IEC 61439-1 by presenting the declarations or certificates of conformity concerning the type tests carried out by independent laboratories (CCC, ASEFA) and supplied by Schneider Electric.

The panel builder is responsible for the three routine tests and delivers the corresponding declarations of conformity.

15.png
LV+S_edited.png
iPM.png

Floor standing system M front access configuration

Configuration

p2.jpg
p1.jpg

Application

This configuration is adapted for lighting, HVAC, lift, etc… in tertiary and industrial buildings.

p3.jpg

Floor standing system M rear access configuration

Configuration

p2.jpg
p5.jpg

Application

This configuration is adapted for lighting, HVAC, lift, etc… in tertiary and industrial buildings.

p6.jpg

Floor standing system M rear access configuration

Configuration

p7.jpg
p8.jpg

Application

This configuration is adapted for lighting, HVAC, lift, etc… in tertiary and industrial buildings.

p3.jpg